Charge efficiently without exceeding your site's power consumption limit.
EVBox Dynamic Load Balancing kit lets you safely balance the power usage between your charging station and other on-site appliances. This allows you to charge efficiently while protecting your grid connection.
EVBox Dynamic Load Balancing kit is designed to make installation a breeze with minimal components for 1-phase and 3-phase electrical installations.
The kit helps you to avoid costs by preventing an increase in energy consumption while allowing you to achieve your maximum charging rate.
EVBox Dynamic Load Balancing kit is connected using an Ethernet cable which ensures a dependable online connection at all times.
Designed with the future in mind, the kit can be enhanced with other smart charging features as they become available.
The EVBox Install app allows a field technician to easily verify if the installation was successful and check if the current reading is functioning properly.
The kit is exclusively sold in combination with EVBox Livo and EVBox Liviqo and has undergone extensive testing to ensure seamless compatibility.
EVBox Dynamic Load Balancing kit is installer-friendly and can be effortlessly configured using the EVBox Install app.
“I had a great experience installing the charger. It was easy to assemble and configure. What I found really handy was the load balancing feature that gives you real-time power draw updates and verification through the app. Longer wires for the measuring coils could be an improvement, but all in all, I’m super satisfied with the product and look forward to future installations.”
Adrian M.
Installer at Caverion
Dynamic load balancing (DLB) constantly monitors changes in your home's energy use and automatically allocates available capacity to your charging station. In response to changes in electricity load, it instantly adjusts the power output for charging an EV. As a result, you'll never exceed your home's maximum power consumption.
EVBox Dynamic Load Balancing kit is flexible and can be installed at any location where you have charging stations, typically your home and company.
EVBox DLB kit can be installed quickly and safely by a certified installer, ensuring optimal placement and maximum performance on your site.
Amperage ratings
50 A and 100A
Maximum circuit voltage
230 V ± 10% or 400 V ± 10%
Maximum output current
100 mA
Output voltage
300 mV peak
Working frequency
50/60 Hz
Weight
500 grams
Dimensions
89.2 x 17.5 x 53 mm (D x W x H)
Maximum installation altitude
3000 m above sea level
Maximum network cable length
30 m unshielded | 150 m shielded
Components
DLB Adapter + CT coil(s)
Operating temperature range
-20 °C to +50 °C
Storage temperature
-40 °C to +80 °C
Ethernet Port
Ethernet port RJ45
Number of terminals
3 x 2
